Adhesive Synthetic Paper is an ideal choice for signage that requires adhesive backing. An affordable, polypropylene-base media, it's thin, light, and very flexible with a durable, wet-strength base. It delivers accurate colors and vivid results on its high-quality matte surface. An instant-drying paper, it's excellent for indoor banners and outdoor signage. When laminated, it's perfect for outdoor signage applications as well. Best of all, its adhesive backing makes it possible to remove and reposition signage for easy mounting.
Like all of Epson's innovative media, this paper is engineered to give you the highest resolution and color saturation possible. Epson's printer driver software actually optimizes the amount of ink released onto the page, based on the type of paper used. As always, EPSON supplies guarantee EPSON quality.
- Re-positionable adhesive for easy mounting
- Block-out backing to eliminate show-through
- Non-glare surface for easy viewing
- 720 dpi printing for high-quality output
- Dries instantly for easy handling with Epson inks
- Water resistant coating for increased durability
- Indoor/outdoor usage
Recommended for both
UV lamination is recommended for outdoor usage.
- Lightfastness
One year outdoors (laminated)
- One year lightfast rating is laminated with a vinyl based UV film, and is based on accelerated testing.
One month outdoors (unlaminated)
- One month lightfast rating is based on an accelerated light test with an actual rain test at 95% RH, 75°F with a rain cycle of 18 minutes every 120 minutes.
- Archivability
Not recommended
- Resistance to water
Good
- Bleeding does not occur with incidental water contact. However, surface lamination is recommended in wet conditions to protect the outer coating. The base is waterproof.
- Ink drying time
Immediate (less than 30 seconds)
- Ink is dry to the touch after printing. However, it takes 24 hours before it cures and becomes durable.
- Lamination feasibility
Pressure sensitive; cold lamination only
- A vinyl-based film that contains a UV absorbent is recommended for lamination purposes. For anti-graffiti purposes, use a fluoridebased film (i.e. Tedlar?). For use in direct sunlight, avoid polyester or polycarbonate film.
- Surface adhesion
Flat surfaces only
- For best results, apply the adhesive to a clean, flat surface. And, test it before applying it to the final print. Stretching the adhesive is not recommended, as the paper may shrink over time.
- Adhesive backing
Re-positionable
- Removable adhesive back provides enough strength and durability for outdoor usage. However, strength will decrease with increased re-positioning.
Specifications
Size:44" x 100'
Count: 1 roll
Basis weight:135 g/m2 (total weight)
Thickness: 5 mil
ISO brightness:97%
Opacity: 93.00%
Base material:Polypropylene
Adhesive material: PET
Surface finish:Matte
Core size: 2"
Spindle:2" high-tension1
Driver Settings
EPSON Stylus Pro 7500/9500: Adhesive Synthetic Paper
Compatibility
C499001UCM:Epson Stylus Pro 10600 Print Engine with UltraChrome? Ink
C381011B: Epson Stylus Pro 9500 Print Engine
C473001UCM:Epson Stylus Pro 9600 Print Engine with UltraChrome? Ink
C595001UCM: Epson Stylus Pro 9800
Operating Specifications
Required temperature for optimum performance:60° - 80° F
15° - 25° C
Required humidity for optimum performance: 40% - 60% RH
